3D Printing News Briefs, March 17, 2022: Software, Companies and More – 3DPrint.com

In today’s 3D printing briefs, we start with the software, as Senvol demonstrated a machine learning approach to developing allowable material properties in a USAF-funded study. Conflux Technology presented its quality control software and AddUp released new monitoring software for AM. Moving on to business, as Headmade Materials closed a €2.5 million Series A funding round, 3D Systems partners with Saremco Dental AG and Collins Aerospace increased its additive capacity with a multi-laser SLM system Solutions. Finally, Badgemaster used Photocentric’s AM technology to create a new reusable name badge.

Senvol ML presents a new way to develop authorized materials for AM

Under an America Makes contract, funded by the US Air Force, Senvol ML demonstrated a machine learning software approach to developing admissible material properties for AM that was just as accurate as the conventional method, but more flexible, fast and efficient. profitable. As stated by America Makes Chief Technology Officer Dr. Brandon Ribic, the Senvol ML program, which supports AM process qualification, has shown a different approach to AM authorizations that uses the approach of machine learning data analysis, as well as digital technology. Senvol worked with partners Northrop Grumman, the National Institute for Aeronautical Research (NIAR), Stratasys Direct Manufacturing and Pilgrim Consulting on the program, who worked to demonstrate this new approach with a flame retardant nylon 11 material, 3D printed at using powder bed fusion technology. .

“Senvol has implemented data-driven machine learning technology that has the potential to significantly reduce the development cost of licensed materials. By demonstrating an entirely new – and significantly more efficient – ​​approach to permit development, Senvol aims to generate tremendous value for the US Air Force, America Makes members, and the additive manufacturing industry as a whole,” said Zach Simkin, president of Senvol. .

“The results of this America Makes program have been incredibly successful. Additionally, we have identified several other areas of opportunity to deepen machine learning capabilities to address this critical industry need. We look forward to continuing to partner with the industry to advance this cutting-edge area. »

Conflux Introduces Quantify Quality Control Software

Speaking of software, Australian company Conflux Technology, well known for its 3D printed heat exchangers, has launched Conflux Quantify, proprietary quality control software developed specifically for the unique geometries required for its heat exchangers. Due to the resolution required of large data sets collected from whole heat exchangers or a series of parts, manual analysis of these sets is not possible; Conflux says its new software provides quantified analysis of large CT datasets.

Conflux uses proprietary Laser Powder Bed Fusion (LPBF) parameter sets that allow for otherwise impossible geometries, and the software analyzes and searches for defects in pore morphology and distribution, surface roughness and thickness of wall, in addition to other areas. It is also said to provide better quality control, cheaper HXs due to less trial and error, and improved development capabilities, leading to lighter/thinner/better performing HXs.

AddUp launches quality assurance software for dashboards

AddUp, a joint venture between French industrial groups Michelin and Fives, recently launched AddUp Dashboards, a new multi-scale monitoring software available for its FormUp Powder Bed Fusion (PBF) and BeAM Directed Energy Deposition (DED) machines. AM’s quality assurance software solution offers both historical processes and real-time data for your printers, regardless of location, and displays a summary on an easy-to-read dashboard. AddUp Dashboards receives data over MQTT and OPC-UA connections, which means it is compatible with all Industry 4.0 platforms.

AddUp Dashboards displays process data for 80 different parameters including powder consumption, gas flow status, oxygen and humidity levels, and more, and the information is updated at a rapid rate five seconds. By tracking data for each release, including the current release, users can get a good view of the progress and status of all their PBF and DED systems over the past month, or just watch to see the latest cycle overlay from the previous version, both of which help to monitor the health of the machine. The user interface only requires a web browser and can easily be customized with over 25 different data visualization styles. AddUp Dashboards also has an alert system. So if a printer’s condition gets out of control, email notifications can be sent to multiple users, or just one, so the issue is resolved in a timely manner.

Headmade Materials Finishes Series A Round

German 3D printing company Headmade Materials, which combines powder metallurgy with plastic 3D printing in its Cold Metal Fusion technology, announced the closing of a Series A funding round that raised approximately $2.5 million. euros; combined with previous funding rounds, the company’s total now stands at €8.25 million. This capital will be used to further develop its unique technology, as well as expand its international sales and production capabilities. The main investor in this round was AM Ventures, and Btov Industrial Technologies Fund invested again.

“With decades of experience in industrial 3D printing, AM Ventures is the perfect fit for us,” said Christian Staudigel, co-founder and CEO of Headmade Materials. “Additionally, the interaction with our existing investor Btov Industrial Technologies Fund has already worked very well elsewhere in additive manufacturing.”

3D Systems and Saremco Dental AG partner for digital dentistry

Using CROWNTEC as part of the NextDent digital dentistry solution enables the production of permanent crowns that are 30% stronger than those produced using previous generations of C&B materials while reducing material waste.

To accelerate innovation in the dental industry, 3D Systems (NYSE:DDD) and Swiss company Saremco Dental AG have entered into a strategic partnership and will combine the materials science expertise offered by Saremco with the digital dentistry solution NextDent from 3D Systems. Additionally, the two companies announced the immediate availability of CROWNTEC composite resin for 3D printing biocompatible permanent restorations, including veneers, crowns, inlays and artificial teeth for dentures, on the dental 3D printer. NextDent 5100. The CE-marked Class IIa material has a 510(k) clearance and comes in multiple shades to match a patient’s teeth, and is claimed to create dental devices that are 30% stronger than previous materials were capable of. produce.

“The pursuit of continuous innovation is our primary goal. For more than 30 years, we have specialized in the development of light-cured resins for restorative dentistry. In recent years, we have been able to transfer our extensive know-how in the field of light-curing to 3D printing technology and successfully develop it. Especially with the superior physical properties of CROWNTEC and its wide range of indications, we have taken another step,” said Franca Schmid, owner and CEO of Saremco Dental. “We are therefore particularly pleased with the strategic cooperation with 3D Systems, a partner with strong sales and innovation capabilities. In addition, 3D Systems offers the entire digital workflow and thus perfectly complements our resin-focused orientation.

Collins Aerospace adds SLM 3D printing capability

SLM Solutions has announced that Collins Aerospace has increased its additive capabilities with the purchase of its NXG XII 600 12-laser 3D printing system. Collins, which specializes in the design and production of engine nozzles, already has several SLM 280 and SLM 500 3D printers, and this new addition will only increase its production of lightweight 3D printed aerospace parts. With its large build size and faster speeds, the NXG XII 600 was designed for mass production, and Collins, who is one of the first ten customers in the world to purchase the printer, will be installing the NXG XII 600 at its engine nozzle production plant. in West Des Moines, Iowa. SLM Solutions will deliver the multilaser system in the second half of 2022.

“Collins Aerospace and SLM Solutions have been operating multiple SLM Solutions machines in different locations around the world for several years now,” said Gerhard Bierleutgeb, executive vice president of global services and solutions at SLM Solutions. “The purchase of the latest generation NXG XII 600 demonstrates that both parties have successfully nurtured and operated this technology in an aerospace production environment.”

Photocentric technology used for a reusable name badge

Finally, UK badge maker Badgemaster used Photocentric 3D LCD printing to create a new reusable name badge for a major retailer. Originally, Badgemaster created a design with a plastic injection molded rear component, and a molding company was to tool and produce the badge, but the project was scrapped during the pandemic. Once it restarted, they ran out of time when the client requested a shorter timeframe to coincide with a rebrand launch. Badgemaster knew that Photocentric had built a 3D print farm to make face mask visor components for the NHS and care homes, and asked the company if they could deliver the product on time; after some product testing, the answer was determined to be yes. Badgemaster ordered 30,000 components to be delivered in three weeks and Photocentric printed them all on their LC Magna systems in Peterborough.

“We were delighted to assist Ian and the Badgemaster team with this project where our print farm was able to provide a quick turnaround of components at the required quality, with no tooling required. Allowing our client to deliver for an important partner under a challenging deadline is a great example of the strengths of additive manufacturing as a solution, and it underscores the benefits of our 3D LCD technology,” said Sally Tipping, Sales Director at Photocentric.

Comments are closed.